Crush 29 Pro - 2019

Crush 29 Pro - 2019

Overview 

Why the Crush 29?

 

  • Frame designed in Britain
  • 5 year frame warranty
  • Custom butted 6061-T6 aluminium
  • Frame geometry for 140mm travel fork
  • Bolt through 12x148 Boost hub spacing
  • 29 inch wheels
  • Internal dropper routing & seatpost options available
  • 73mm BB Shell with ISCG 05 tabs
  • Generous mud clearance
  • New yoked chainstay design gives clearance for 29x2.5 tyres or 27.5x3.0
  • Minimal design cable & hose bosses

 

There's a well known adage: "This one goes to 11". You know it, we know it, and it makes us grin. And the same applies to this new version of our notorious Crush, but we've notched it a little higher – This one goes to 29.

If the latest Crush isn't nuts enough in the hardcore hardtail stakes then this one's for you – the Crush 29 has landed, fast and hard. This is one rip-roaring ride on the dark side, designed to crash through everything you chuck it at. Seriously, you've been warned, it's going to spoil you, trails won't seem the same after you've screamed through them on a Crush 29.

All the checkboxes that make the classic Crush so good are ticked in bold here. Slack and low, fast and fierce. What more do you need to know? Yes, it's got a bolt-through rear axle, stacks of big 29er tyre clearance and ISCG05 all present and correct for the hooligans. The frame also offers the clearance to allow you to run 27.5+ tyres up to a 3.0 inch carcass if that's how you roll.

It's difficult not to get over-excited about the Crush 29. It puts just about every other hardtail in the shade - and you've got to love it for that. We know we do.

Specs & Options 

SIZES AND COLOURS

Sizes
M   L   XL  
Colour
Mountain Mint

Select a frame size to choose colour

Decals
Orange/Black Decals

Frame and Fork

6061-T6 Custom Butted OS Aluminium Tube. Wheel Size: 29.

Swingarm
Bolt Type Allen Key Head (Boost 148mm Hub)
Rear Shock
N/A
Headset
FPD 44mm For Tapered Steerer
Fork
Fox 34 Performance 140mm 29

Drivetrain

Bottom Bracket
SRAM GXP
Crankset
SRAM Descendant 6K Dub
Rear Mech
SRAM GX Eagle 12spd
Chain
SRAM NX Eagle
Shifters
SRAM NX Eagle 12spd
Cassette
SRAM NX Eagle 1230 11-50T
Chain Device

Wheel and Tyres

Wheelset
Kore Realm 3.0 on Joytech 29
Tyres
Maxxis Minion DHF 2.5 WT and DHR II 2.4 WT 29

Braking

Brakes
Shimano SLX 180/180

Finishing Kit

Seatpost
SDG Tellis
Seat Clamp
Strange QR
Stem
Race Face Ride M35 50mm
Saddle
Kore Conex
Handlebars
RaceFace Chester 780mm M35
Grips
Strange 130 Lock - On Grips Black
Pedals
Kore Rivera Thermo

Geometry & Tech Info 

2019 crush 29 geometry
Crush Geometry
6061-T6 Custom Butted OS Aluminium Tube
Frame Size M L XL
Seat Tube Length 17" 18" 20"
A. Head Angle 65° 65° 65°
B. Seat Angle 73.5° 73.5° 73.5°
C. Top Tube 622 635 647
D. Top Tube (effective) 620 640 660
E. BB Height (from ground) 310 310 310
E. BB height (axle DIFF) -60 -60 -60
F. Chainstay 445 445 445
G. Headtube 110 120 130
H. Wheel base 1195 1221 1242
J. Reach 428 445 462
K. Stack 648 657 666
Standover 689 706 746
Stem length 50 50 50
Unless otherwise indicated all measurements are in mm. Frame angles are measured static, without rider sag. Bottom bracket height from ground is with 710 mm Ø tyre.
technical Info
fork travel
OPTIMUM MAXIMUM MINIMUM
140 mm 140 mm 140 mm
  Single crown   Triple Clamp
Rear Hub 148x12mm Bolt-through
Seatpost Ø 30.9 mm
Seatclamp Ø 34.9 mm
BB Shell 73mm ISCG 05
Tapered Headset Upper: ZS44/28.6
Lower: EC44/40
Ride Guide
Yes Downhill 4.0 out of 5 stars
Yes Freeride 4.0 out of 5 stars
Yes Enduro 5.0 out of 5 stars
Yes All-Mountain 4.0 out of 5 stars
Yes XC Trail 4.0 out of 5 stars
Yes Adventure 4.0 out of 5 stars
Yes Touring 4.0 out of 5 stars
Yes XC Racing 4.0 out of 5 stars
Back to blog